Unexpected sense查询表
在磁盘系统中，可能会遇到Unexpected sense报错，这里列出来Unexpected sense查询表，供大家参考，定位故障，由于表格功能不完美，无法用一个好看的表格呈现出了，只有这样了。
故障表
| A列值 | 说明 |
| 1 | Soft Error |
| 2 | Not Ready |
| 3 | Medium Error |
| 4 | Hardware Error |
| 5 | Illegal Request |
| 6 | Unit Attention |
| 7 | Write Protect |
| 8 | Aborted Command |
| x | Other |
总表
| A | B | C | 说明 |
| 0 | 0 | 0 | No error |
| 0 | 5D | 0 | No sense – PFA threshold reached |
| 1 | 1 | 0 | Recovered Write error – no index |
| 1 | 2 | 0 | Recovered no seek completion |
| 1 | 3 | 0 | Recovered Write error – write fault |
| 1 | 9 | 0 | Track following error |
| 1 | 0B | 1 | Temperature warning |
| 1 | 0C | 1 | Recovered Write error with auto-realloc – reallocated |
| 1 | 0C | 3 | Recovered Write error – recommend reassign |
| 1 | 12 | 1 | Recovered data without ECC using prev logical block ID |
| 1 | 12 | 2 | Recovered data with ECC using prev logical block ID |
| 1 | 14 | 1 | Recovered Record Not Found |
| 1 | 16 | 0 | Recovered Write error – Data Sync Mark Error |
| 1 | 16 | 1 | Recovered Write error – Data Sync Error – data rewritten |
| 1 | 16 | 2 | Recovered Write error – Data Sync Error – recommend rewrite |
| 1 | 16 | 3 | Recovered Write error – Data Sync Error – data auto-reallocated |
| 1 | 16 | 4 | Recovered Write error – Data Sync Error – recommend reassignment |
| 1 | 17 | 0 | Recovered data with no error correction applied |
| 1 | 17 | 1 | Recovered Read error – with retries |
| 1 | 17 | 2 | Recovered data using positive offset |
| 1 | 17 | 3 | Recovered data using negative offset |
| 1 | 17 | 5 | Recovered data using previous logical block ID |
| 1 | 17 | 6 | Recovered Read error – without ECC, auto reallocated |
| 1 | 17 | 7 | Recovered Read error – without ECC, recommend reassign |
| 1 | 17 | 8 | Recovered Read error – without ECC, recommend rewrite |
| 1 | 17 | 9 | Recovered Read error – without ECC, data rewritten |
| 1 | 18 | 0 | Recovered Read error – with ECC |
| 1 | 18 | 1 | Recovered data with ECC and retries |
| 1 | 18 | 2 | Recovered Read error – with ECC, auto reallocated |
| 1 | 18 | 5 | Recovered Read error – with ECC, recommend reassign |
| 1 | 18 | 6 | Recovered data using ECC and offsets |
| 1 | 18 | 7 | Recovered Read error – with ECC, data rewritten |
| 1 | 1C | 0 | Defect List not found |
| 1 | 1C | 1 | Primary defect list not found |
| 1 | 1C | 2 | Grown defect list not found |
| 1 | 1F | 0 | Partial defect list transferred |
| 1 | 44 | 0 | Internal target failure |
| 1 | 5D | 0 | PFA threshold reached |
| 2 | 4 | 0 | Not Ready – Cause not reportable. |
| 2 | 4 | 1 | Not Ready – becoming ready |
| 2 | 4 | 2 | Not Ready – need initialise command (start unit) |
| 2 | 4 | 3 | Not Ready – manual intervention required |
| 2 | 4 | 4 | Not Ready – format in progress |
| 2 | 4 | 9 | Not Ready – self-test in progress |
| 2 | 31 | 0 | Not Ready – medium format corrupted |
| 2 | 31 | 1 | Not Ready – format command failed |
| 2 | 35 | 2 | Not Ready – enclosure services unavailable |
| 2 | 3A | 0 | Not Ready – medium not present |
| 2 | 4C | 0 | Diagnostic Failure – config not loaded |
| 3 | 2 | 0 | Medium Error – No Seek Complete |
| 3 | 3 | 0 | Medium Error – write fault |
| 3 | 10 | 0 | Medium Error – ID CRC error |
| 3 | 11 | 0 | Medium Error – unrecovered read error |
| 3 | 11 | 1 | Medium Error – read retries exhausted |
| 3 | 11 | 2 | Medium Error – error too long to correct |
| 3 | 11 | 4 | Medium Error – unrecovered read error – auto re-alloc failed |
| 3 | 11 | 0B | Medium Error – unrecovered read error – recommend reassign |
| 3 | 14 | 1 | Medium Error – record not found |
| 3 | 16 | 0 | Medium Error – Data Sync Mark error |
| 3 | 16 | 4 | Medium Error – Data Sync Error – recommend reassign |
| 3 | 19 | 0 | Medium Error – defect list error |
| 3 | 19 | 1 | Medium Error – defect list not available |
| 3 | 19 | 2 | Medium Error – defect list error in primary list |
| 3 | 19 | 3 | Medium Error – defect list error in grown list |
| 3 | 19 | 0E | Medium Error – fewer than 50% defect list copies |
| 3 | 31 | 0 | Medium Error – medium format corrupted |
| 3 | 31 | 1 | Medium Error – format command failed |
| 4 | 1 | 0 | Hardware Error – no index or sector |
| 4 | 2 | 0 | Hardware Error – no seek complete |
| 4 | 3 | 0 | Hardware Error – write fault |
| 4 | 9 | 0 | Hardware Error – track following error |
| 4 | 11 | 0 | Hardware Error – unrecovered read error in reserved area |
| 4 | 16 | 0 | Hardware Error – Data Sync Mark error in reserved area |
| 4 | 19 | 0 | Hardware Error – defect list error |
| 4 | 19 | 2 | Hardware Error – defect list error in Primary List |
| 4 | 19 | 3 | Hardware Error – defect list error in Grown List |
| 4 | 31 | 0 | Hardware Error – reassign failed |
| 4 | 32 | 0 | Hardware Error – no defect spare available |
| 4 | 35 | 1 | Hardware Error – unsupported enclosure function |
| 4 | 35 | 2 | Hardware Error – enclosure services unavailable |
| 4 | 35 | 3 | Hardware Error – enclosure services transfer failure |
| 4 | 35 | 4 | Hardware Error – enclosure services refused |
| 4 | 35 | 5 | Hardware Error – enclosure services checksum error |
| 4 | 3E | 3 | Hardware Error – self-test failed |
| 4 | 3E | 4 | Hardware Error – unable to update self-test |
| 4 | 44 | 0 | Hardware Error – internal target failure |
| 5 | 1A | 0 | Illegal Request – parm list length error |
| 5 | 20 | 0 | Illegal Request – invalid/unsupported command code |
| 5 | 21 | 0 | Illegal Request – LBA out of range |
| 5 | 24 | 0 | Illegal Request – invalid field in CDB (Command Descriptor Block) |
| 5 | 25 | 0 | Illegal Request – invalid LUN |
| 5 | 26 | 0 | Illegal Request – invalid fields in parm list |
| 5 | 26 | 1 | Illegal Request – parameter not supported |
| 5 | 26 | 2 | Illegal Request – invalid parm value |
| 5 | 26 | 3 | Illegal Request – invalid field parameter – threshold parameter |
| 5 | 26 | 4 | Illegal Request – invalid release of persistent reservation |
| 5 | 2C | 0 | Illegal Request – command sequence error |
| 5 | 35 | 1 | Illegal Request – unsupported enclosure function |
| 5 | 49 | 0 | Illegal Request – invalid message |
| 5 | 53 | 0 | Illegal Request – media load or eject failed |
| 5 | 53 | 1 | Illegal Request – unload tape failure |
| 5 | 53 | 2 | Illegal Request – medium removal prevented |
| 5 | 55 | 0 | Illegal Request – system resource failure |
| 5 | 55 | 1 | Illegal Request – system buffer full |
| 5 | 55 | 4 | Illegal Request – Insufficient Registration Resources |
| 6 | 28 | 0 | Unit Attention – not-ready to ready transition (format complete) |
| 6 | 29 | 0 | Unit Attention – POR or device reset occurred |
| 6 | 29 | 1 | Unit Attention – POR occurred |
| 6 | 29 | 2 | Unit Attention – SCSI bus reset occurred |
| 6 | 29 | 3 | Unit Attention – TARGET RESET occurred |
| 6 | 29 | 4 | Unit Attention – self-initiated-reset occurred |
| 6 | 29 | 5 | Unit Attention – transceiver mode change to SE |
| 6 | 29 | 6 | Unit Attention – transceiver mode change to LVD |
| 6 | 2A | 0 | Unit Attention – parameters changed |
| 6 | 2A | 1 | Unit Attention – mode parameters changed |
| 6 | 2A | 2 | Unit Attention – log select parms changed |
| 6 | 2A | 3 | Unit Attention – Reservations pre-empted |
| 6 | 2A | 4 | Unit Attention – Reservations released |
| 6 | 2A | 5 | Unit Attention – Registrations pre-empted |
| 6 | 2F | 0 | Unit Attention – commands cleared by another initiator |
| 6 | 3F | 0 | Unit Attention – target operating conditions have changed |
| 6 | 3F | 1 | Unit Attention – microcode changed |
| 6 | 3F | 2 | Unit Attention – changed operating definition |
| 6 | 3F | 3 | Unit Attention – inquiry parameters changed |
| 6 | 3F | 5 | Unit Attention – device identifier changed |
| 6 | 5D | 0 | Unit Attention – PFA threshold reached |
| 7 | 27 | 0 | Write Protect – command not allowed |
| B | 0 | 0 | Aborted Command – no additional sense code |
| B | 1B | 0 | Aborted Command – sync data transfer error (extra ACK) |
| B | 25 | 0 | Aborted Command – unsupported LUN |
| B | 3F | 0F | Aborted Command – echo buffer overwritten |
| B | 43 | 0 | Aborted Command – message reject error |
| B | 44 | 0 | Aborted Command – internal target failure |
| B | 45 | 0 | Aborted Command – Selection/Reselection failure |
| B | 47 | 0 | Aborted Command – SCSI parity error |
| B | 48 | 0 | Aborted Command – initiator-detected error message received |
| B | 49 | 0 | Aborted Command – inappropriate/illegal message |
| B | 4B | 0 | Aborted Command – data phase error |
| B | 4E | 0 | Aborted Command – overlapped commands attempted |
| B | 4F | 0 | Aborted Command – due to loop initialisation |
| E | 1D | 0 | Miscompare – during verify byte check operation |
| x | 5 | 0 | Illegal request |
| x | 6 | 0 | Unit attention |
| x | 7 | 0 | Data protect |
| x | 8 | 0 | LUN communication failure |
| x | 8 | 1 | LUN communication timeout |
| x | 8 | 2 | LUN communication parity error |
| x | 8 | 3 | LUN communication CRC error |
| x | 9 | 0 | vendor specific sense key |
| x | 9 | 1 | servo fault |
| x | 9 | 4 | head select fault |
| x | 0A | 0 | error log overflow |
| x | 0B | 0 | aborted command |
| x | 0C | 0 | write error |
| x | 0C | 2 | write error – auto-realloc failed |
| x | 0E | 0 | data miscompare |
| x | 12 | 0 | address mark not found for ID field |
| x | 14 | 0 | logical block not found |
| x | 15 | 0 | random positioning error |
| x | 15 | 1 | mechanical positioning error |
| x | 15 | 2 | positioning error detected by read of medium |
| x | 27 | 0 | write protected |
| x | 29 | 0 | POR or bus reset occurred |
| x | 31 | 1 | format failed |
| x | 32 | 1 | defect list update error |
| x | 32 | 2 | no spares available |
| x | 35 | 1 | unspecified enclosure services failure |
| x | 37 | 0 | parameter rounded |
| x | 3D | 0 | invalid bits in identify message |
| x | 3E | 0 | LUN not self-configured yet |
| x | 40 | 1 | DRAM parity error |
| x | 40 | 2 | DRAM parity error |
| x | 42 | 0 | power-on or self-test failure |
| x | 4C | 0 | LUN failed self-configuration |
| x | 5C | 0 | RPL status change |
| x | 5C | 1 | spindles synchronised |
| x | 5C | 2 | spindles not synchronised |
| x | 65 | 0 | voltage fault |
| x | ≥80 | x | Vendor specific |
| x | x | ≥80 | Vendor specific |
例
Unexpected sense: PD 03(e0x45/s6) Path 5000c500b908ad79, CDB: 28 00 52 12 5c 80 00 00 80 00, Sense: 3/11/00这里的sense为
3 11 003为Medium Error。
代表硬盘本身存在故障。
版权声明：
作者：佛西
链接：https://foxi.buduanwang.vip/yj/750.html/
文章版权归作者所有，未经允许请勿转载
如需获得支持，请点击网页右上角
作者：佛西
链接：https://foxi.buduanwang.vip/yj/750.html/
文章版权归作者所有，未经允许请勿转载
如需获得支持，请点击网页右上角
THE END
1
二维码
海报
Unexpected sense查询表
在磁盘系统中，可能会遇到Unexpected sense报错，这里列出来Unexpected sense查询表，供大家参考，定位故障
共有 0 条评论